0 Items
2019+ ZX6 ECU Flash2019+ ZX6 ECU Flash
Click to enlarge

2019+ ZX6 ECU Flash

Starting at: $199.99

ECU flash is a must on the 2019+ ZX6.

Here are the options and their benefits/explanations with the suggested and currently selected settings, but you can chose on your own if you like:


Exhaust Valve
[ DISABLE ]
- Bypasses the Exhaust Valve Servo under the rear seat



Decel Fuel Cut
[ DISABLE ]
- Disables fuel injector deceleration cut-off. This helps smooth reaction when you let off the throttle reducing abrupt engine braking, also sends unburnt fuel to the exhaust causing some backfiring when decelerating from high RPM. This can be corrected with exhaust valve block off plates.



CA Model EVAP
[ DISABLE ]
- California Emissions stuff (for Cali bikes)



ECT / USB Error
[ DISABLE ]
- Eliminates check engine light from Engine Coolant Temp or USB reading errors



Warmup Fast-Idle
[ ENABLE ]
- Enables or Disables warm up high idle compensation



Air Switching Valve
[ DISABLE ]
- Bypasses Air Switching Valve (Clean air valve on the valve cover)



Force Quick Shifter System On
[ ENABLE ]
- Eliminates the need to keep the left bar controls to use the QSS system



Traction Control System
[ DISABLE ]
- Traction Control System is DISABLED completely. It will display setting 1 but will not function and sensors may be removed. This eliminates the need to toggle the TC switch every time you start the bike and opens up the hand brake bracket options to all 05+ ZX6 brackets *Note: The rear wheel sensor and ring control the speedometer.



Cooling Fan ON Temperature
[ 180F (82.2C) ]
- Fan temperature is modified to turn the fan(s) on at a lower temperature (selectable) OEM is 212F. We recommend 180F as that is when the idle becomes stable.




You would need to mail us your ECU and we ship back with 2-3 day standard or you can choose a 1-day turnaround so you have it back in under a week! (USA customers)

*THE ECU IS THE LOWER UNIT IN THE STACK AND HAS 2 WIDER PLUGS.
Please mail your ECU to:

The Sic Shop - ECU
1998 Valley Rim Rd
El Cajon, CA 92019



IT IS VERY IMPORTANT THAT YOU BYPASS THE CLUTCH SWITH - EITHER BY CONNECTING THE WIRES TOGETHER IF YOU KEEP THE LEFT BAR CONTROLS OR BY CONNECTING THE 2 CENTER PINS (TOP AND BOTTOM) ON THE PLUG THAT THE LEFT BAR CONTROLS GO TO ON THE BIKE. IF YOU DO NOT DO THIS, THE BIKE WILL FREAK OUT AND MANY SYMBOLS WILL FLASH ON THE GAUGE

THE 2019+ ZX6 ARE OBD II COMPLIANT WHICH MEANS THE CHECK ENGINE LIGHT WILL NOT SELF-RESET. SO IF YOU LEAVE SOMETHING UNPLUGGED FOR EXAMPLE LIKE THE AIR BOX SENSOR, THE CHECK ENGINE LIGHT WILL NEED TO BE CLEARED WITH A OBD II SCANNER LIKE ON A CAR. WE HAVE THESE AVAILABLE WITH THE ADAPTER HARNESS.

Add to Cart:

  • Manufactured by: The Sic Shop

Please Choose:



















ECU Options






This product was added to our catalog on Thursday 04 April, 2019.